Categories Products

Front and Rear Hub Kits

Mid-Board Hub Kits

   
MCK-T101 934 Mid-board Hub Kits, 6-piston Disc Brake Kit  
MCK-T102 930 Mid-board Hub Kits, 4-piston Disc Brake Kit  
       

Rear Disc Brake Kits

   
MCK-T103 Rear Disc Brake Kit, 2-Piston, Long Spline    
MCK-T104 Rear Disc Brake Kit, 4-Piston, Long Spline    
G1-2400 2 piston/4 piston billet callipers, stainless pistons, kevlar base pads, heat treated chrome molly centres, standard spline or Gear One exclusive super centres, CNC machined slotted rotors.
G1-2205 Rear Brakes - 4 Lug Disc Brakes, 2 Piston, 4 Piston
     

Front Disc Brake Kits

   
MCK-T106 Front Disc Brake Kit, 2-Piston Combo    
MCK-T107 Front Disc Brake Kit, 4-Piston Combo  
MCK-T108 2” Hollow Front Disc Brake Kit, 2-Piston  
MCK-T109 2” Hollow Front Disc Brake Kit, 4-Piston    
G1-2201 Combo, Link Pin, Ball Joint, King Kong with Billet 2 Piston, Billet Callipers, Brackets, Bearings, Seals and CNC Machined Slotted Rotors.2" Hollow Spindle Pro Front Brakes - 11.125 CNC Machined Slotted Rotors, 4 Piston Hard Anodized Calliper

Front - VW 10" x .200"

   
Complete with seals, bearings, races, brake pads and two 1.5" pistons. Caliper is machined billet aluminum. 10" dia. x .200" thick steel rotor. Hub is made from billet 7075-T6 aluminium. Studs: 14mmx1.5 (also in 4-Lug)  
CNC-652S Stock VW - L/Pin  
CNC-652W Std - Wright Spindles  
CNC-652SF Sm. - Foci. Spindles  
CNC-652F Foddrill Spindles  
CNC-652B VW - B/J Front End  
CNC-652LW Lg. 2" Piston - Wright  

Front - VW 11" x .300"

   
Complete with seals, bearings, races, brake pads and four 1.75" pistons. Caliper is machined billet aluminum. 11" dia. x .300" thick steel rotor. Hub is made from billet 7075-T6 aluminum. 14mm x 1.5 studs. (also available in 4-Lug).  

Four 1.75" Pistons.

   
CNC-654S Stock VW - Link Pin  
CNC-654W Std - Wright Spindles  
CNC-654SF Small - Foddrill Spindles  
CNC-654F Foddrill Spindles  
CNC-654B VW - BJ Front End  

Two 2" Pistons

   
CNC-656B VW - BJ Front End    
CNC-656S Stock VW - Link Pin    
CNC-656F Std. Wright Spindles    

with or without 2-inch Hollow Spindles.

   

10-inch Rotors

   
Complete with 2" hollow spindle and nut, with seals, bearings, races, brake pads and two 1.5" pistons. Caliper is machined billet aluminum. 10" dia. x .200" thick steel rotor. Hub is made from billet 7075-T6 aluminum. Studs are 14mm x 1.5 Available in 4-Lug
CNC-652CNC Front Disc Brake Kit with 2" Hollow Spindle  
CNC-652LSN Front Disc Brake Kit without 2" Hollow Spindle  

11-inch Rotors

   
Complete with 2" hollow spindle and nut, with seals, bearings, races, brake pads and four 1.75" stainless steel pistons. Caliper is machined billet aluminum. 11" dia. x .300" thick steel rotor. Hub is made from billet 7075-T6 aluminum. Studs are 14mm x 1.5. (also available in 4-Lug)
CNC-654CNC Front Disc Brake Kit with 2" Hollow Spindle  
CNC-654LSN Front Disc Brake Kit without 2" Hollow Spindle  
       

Centre Board Hubs

   
G1-2605 934.5 Centre Board Hubs - 6 piston calipers/4 piston callipers, taper roller bearings, Gear One 934.5 Super CV Standard, arm plates, kevlar base, brake pads, hard anodized billet callipers.
G1-2610 930 Centre Board Hubs - 6 piston calipers/4 piston callipers, taper roller bearings, 930 CV, arm plates, kevlar base brake pads, hard anodized billet callipers.
       

Micro Stub Kit

   
G1-2500 930/934.5 Micro Stub Kit. Aircraft quality alloy, heat treated 1.375 race proven stub axles, taper roller bearings, seals, heat treated crush sleeves billet aluminium or HT steel bearing carriers,4 piston super centre disc brakes complete
CNC-642N Micro Kit, 626 Caliper, Rear  
CNC-642T M/Kit, 626 Cali. w/DOM Tube, Rear  
CNC-643N Micro Kit, 625 Caliper, Rear  
CNC-643T M/Kit, 625 Cali. w/DOM Tube, Rear  

Spindle Mount Adapter

   
G1-2300 5 Lug Spindle Mount Adapter includes Bearings & Seals.
     

Bearing Carriers

   
G1-2510 Billet aluminium and HT Steel Bearing Carriers, bolt in design accepts Type 1 stubs & Gear One Super Stubs.
     

Lug Nuts

     
G1-2820 Lug Nuts  
     

Bearing Caps

   
G1-4340 Billet IRS Bearing Caps  
     

Front Spindles

   
CNC-651W Light-Weight Large Spindle  
CNC-651S Light-Weight Stock King Pin Spindle  
       

Floater Parts

     
MCK-0107 Floater Hat only    
MCK-0107K Floater Hat with Races & Studs    
MCK-0105 Floater Spindles, 3/8" - Right    
MCK-0105-L Floater Spindles, 3/8" - Left    
MCK-0106 Floater Arm Flange, 3/8"    
MCK-0121 Floater Nut - RH    
MCK-0121-L Floater Nut - LH    
MCK-0122 Floater Lock Ring    
MCK-0198 Floater Seal Holder    
MCK-0 199 Button Head, 10-32 x Y2"    
MCK-0200 Conlock Nut, 1/4"    
MCK-0201 Allen Caliper Bolt, 3/8- 24 x 1"    
MCK-0202 Rotor Bolt, 1/4- 28 x 3/4"    
MCK-0203 Floater Shim - Specify size    
MCK-0204 Stud, 1/4- 28 x 1-1/2"    
MCK-0205 AN Washer, 1/4"    
MCK-0206 Allen Bolts, 5/16" -24 x 3/4"    
MCK-0207 Spindle Bolts, 3/8" -24 x 3/4"    
MCK-0240 930 Summers Bolt - 10mm    
MCK-0208 934 CV Bolt, 12 x 2-1/2"    
MCK-0209 934 CV Bolt, 12 x 2-3/4"    
MCK-0210 Allen CV Bolt, Y2 x 2-1/2"    
MCK-0211 Allen CV Bolt, 1/2 x 2-3/4"    
MCK-0235 Inner Floater Boot Holder    
MCK-0109 934 CV Plate, 7/16"    
MCK-0110 934 CV Plate, 1/2"    
MCK-0115 930 CV Plate    
MCK-0119 930 CV Cap    
MCK-0120-12 934 CV Cap, 12mm    
MCK-0120-1 934 CV Cap, 1/2"    
       

Complete Floater Kits

   
MCK-KIT-2 930 Floater Kit, Solid    
MCK-KIT-3 930 Floater Kit, Vented    
MCK-KIT-4 934 Floater Kit, Vented    
       

Floater Kits with Axle

   
SUM-406560 930 Floater Kit w/Axle    
SUM-406560-1 934 Floater Kit w/Axle    
       

Floater Tool

     
SUM-6573 Floater Tool    
       

Floater Callipers & Accessories

   
SUM-6576-L 6 Piston Calliper Left    
SUM-6576-R 6 Piston Calliper Right    
SUM-6576-7 Piston Only 1-1/2"    
SUM-6704 Large Caliper 0-ring    
SUM-6705 Small Caliper 0-ring    
TBM-60304 6" Std Brake Pad, #3 Compound    
       

Floater Rotors

   
SUM-6703 Vented .81x10-7/8" O.D.    
SUM-6564-1 Vented .81x11-1/8" O.D.    
SUM-6703-12 Vented .81x12" O.D.    
BAT-ROTOR Solid .81x11-1/8" O.D.    
COL-H81-1000-150 3/4" Vented, Fortin    
COL-DV32-11/4x14x8 Trophy Truck, 1-1/4" x 8 Bolt x 9-1/4" Bolt Circle x 14"    
COL-DV32-1400x150 Trophy Truck, 1-1/4" x 8 Bolt x 9" Bolt Circle x 14"    
COL-D30-125-12-18-762 Truck, 1-1/4" x 8 Bolt x 7-5/8" Bolt Circle x 12"    
     

Floater Boots

   
SUM-6564-4 Floater Boot, Nylon    
SUM-6548 F/Boot, Nylon – 930    
SUM-6562-6 F/Boot, Nylon - 934